Approval no.: E8 67R01 3018/16
Multivalve type: cylindrical 0 degrees standard (d 6 mm)
Model: ELPIGAZ AT02
Height [H]: 315 mm
Application to cylindrical tanks with MVA flange for 6 screws:
- height [H]: 315 mm
- capacity [D]: 10-110 liters
- with an inclination angle of 0 degrees (relative to the horizontal)
Gas input (refueling): 1/4 inch, cable - d 8 mm
Gas outlet (to the reducer): M10x1.0 mm, cable - d 6 mm
Assembly: without gas filler
Technical data:
- coil: 12 V DC, flat connectors (2)
- max. pressure of safety valve (PRV): 2.7 Mpa (27 bar)
- PRV flow: 23.4 Nm3/min
- PRD flow: 4.4 Nm3/min
- refueling cut-off: 80%
The offered multivalve D 315 mm for a cylindrical tank, angle of inclination. MVA 0 degrees can be a replacement for:
- Tomasetto AT0202
- Landi Renzo
- OMB
- BRC MV Europa
Elpigaz AT02 multivalve low 315/30 cyl.
37.79€
Tax included
30,73 €
Net
Wysyłamy w poniedziałek, 03.03
EKX315HS/BWE
Approval no.: E8 67R01 3018/16
Multivalve type: cylindrical 0 degrees standard (d 6 mm)
Model: ELPIGAZ AT02
Height [H]: 315 mm
Application to cylindrical tanks with MVA flange for 6 screws:
- height [H]: 315 mm
- capacity [D]: 10-110 liters
- with an inclination angle of 0 degrees (relative to the horizontal)
Gas input (refueling): 1/4 inch, cable - d 8 mm
Gas outlet (to the reducer): M10x1.0 mm, cable - d 6 mm
Assembly: without gas filler
Technical data:
- coil: 12 V DC, flat connectors (2)
- max. pressure of safety valve (PRV): 2.7 Mpa (27 bar)
- PRV flow: 23.4 Nm3/min
- PRD flow: 4.4 Nm3/min
- refueling cut-off: 80%
The offered multivalve D 315 mm for a cylindrical tank, angle of inclination. MVA 0 degrees can be a replacement for:
- Tomasetto AT0202
- Landi Renzo
- OMB
- BRC MV Europa
The ELPIGAZ AT02 multivalve (MVA) is intended for installation in cylindrical (cylindrical) tanks with MVA set at an angle of 0 degrees and connected to the LPG reducer-evaporator with a 6 mm pipe. Gas connections (gas input and output) are directed to the right (RS). Recommended in LPG installations for vehicles with a power of up to 200 HP.
It contains such tank equipment as:
- valve limiting tank filling to 80%,
- automatic shut-off valve of the tank (electrovalve) with a valve limiting gas outflow,
- overpressure safety valve (PRV),
- thermal safety valve (PRD),
- socket for gas quantity indicator (reserve sensor, full indication sensor),
- manual shut-off valve.
The multivalve approved in accordance with UNECE regulation 67R01 is adapted to work with cylindrical (cylindrical) tanks with an MVA flange set at an angle of 0 degrees, according to the list in accordance with the approval granted for the tank in which it is installed.
The ELPIGAZ AT02 multivalve can work with:
- ELPIGAZ reserve sensors (AE 81051R, AER 951R, AER 930R),
- with ELPIGAZ full indication sensors: nine-threshold (AE 81050R), resistive 0-90 ohm (AE81090R), contactless (RS001),
- with full indication and reserve sensors from AEB,
- with full indication sensors and third-party reserve sensors compatible with Tomasetto multi-valves.
All Tomasetto multi-valves are manufactured using high-tech processes and are 100% calibrated and tested.
The offered product includes:
- 200 / 0° multivalve for cylindrical (cylindrical) tanks with MVA at an angle of 0°,
- cable (harness) for connection with the solenoid valve coil,
- assembly bag (M5 screws, barrels, barrel clamps).
The set does not include:
- gas-tight casing (cover) of a multivalve for a cylindrical tank,
- gas filler.
EKX315HS/BWE