Approval No.: E8 67R01 3018/16
Multivalve type: cylindrical 30 degrees Big Flow (d 8 mm)
Model: ELPIGAZ AT02 BF
Height [H]: 450 mm
Application for cylindrical tanks with MVA flange for 6 screws:
- height [H]: 450 mm
- capacity [D]: 30-240 liters
- with an inclination angle of 30 degrees (relative to horizontal)
Gas inlet (refueling): 1/4 inch, hose - d 8 mm
Gas outlet (to reducer): M12x1.0 mm, hose - d 6 mm
Complete set: without gas filler
Technical data:
- coil: 12 V DC, flat connectors (2)
- max. safety valve pressure (PRV): 2.7 Mpa (27 bar)
- PRV flow: 23.4 Nm3/min
- PRD flow: 4.4 Nm3/min
- refueling cut-off: 80%
The offered multivalve D 450 mm for cylindrical tank angle MVA 30 degrees can be a replacement for:
- Tomasetto AT02 EXTRA02
- Landi Renzo
- OMB
- BRC MV Europa
Elpigaz AT02 multivalve (Big Flow) low 450/30 cyl. rights
44.43€
Tax included
36,12 €
Net
Wysyłamy w poniedziałek, 25.11
EKX450RSBF/BWE
Approval No.: E8 67R01 3018/16
Multivalve type: cylindrical 30 degrees Big Flow (d 8 mm)
Model: ELPIGAZ AT02 BF
Height [H]: 450 mm
Application for cylindrical tanks with MVA flange for 6 screws:
- height [H]: 450 mm
- capacity [D]: 30-240 liters
- with an inclination angle of 30 degrees (relative to horizontal)
Gas inlet (refueling): 1/4 inch, hose - d 8 mm
Gas outlet (to reducer): M12x1.0 mm, hose - d 6 mm
Complete set: without gas filler
Technical data:
- coil: 12 V DC, flat connectors (2)
- max. safety valve pressure (PRV): 2.7 Mpa (27 bar)
- PRV flow: 23.4 Nm3/min
- PRD flow: 4.4 Nm3/min
- refueling cut-off: 80%
The offered multivalve D 450 mm for cylindrical tank angle MVA 30 degrees can be a replacement for:
- Tomasetto AT02 EXTRA02
- Landi Renzo
- OMB
- BRC MV Europa
The ELPIGAZ AT02 multivalve (MVA) is designed for installation in cylindrical (cylindrical) tanks with the MVA set at an angle of 30 degrees and connected to the reducer - LPG vaporizer with a d 8 mm hose. The gas connection (gas inlet and outlet) is directed to the right (RS). Recommended in LPG systems for vehicles with power above 200 HP.
It contains the following tank equipment elements:
- a valve limiting the tank filling to 80%,
- an automatic tank shut-off valve (solenoid valve) with a valve limiting the gas flow,
- an overpressure safety valve (PRV),
- a thermal safety valve (PRD),
- a socket for a gas quantity indicator (reserve sensor, full indication sensor),
- a manual shut-off valve.
The multivalve homologated in accordance with UN ECE 67R01 regulation is adapted to work with cylindrical (cylindrical) tanks with an MVA flange with an angle of inclination of 30 degrees, according to the list in accordance with the homologation granted for the tank in which it is installed. For tanks with a capacity of over 160 liters, an additional safety valve is required on the tank in the case of installation of the ELPIGAZ AT02 multivalve.
The ELPIGAZ AT02 Big Flow multivalve can work with:
- ELPIGAZ reserve sensors (AE 81051R, AER 951R, AER 930R),
- with ELPIGAZ full indication sensors: nine-threshold (AE 81050R), resistive 0-90 ohm (AE81090R), contactless (RS001),
- with AEB full indication and reserve sensors,
- with full indication and reserve sensors from other companies working with Tomasetto multivalves.
All Tomasetto multivalves are manufactured using high-tech processes and are 100% calibrated and tested.
The offered product includes:
- 450 / 30° Big Flow multivalve for cylindrical (rolled) tanks with MVA in a vertical position (at an angle of 30°),
- cable (harness) for connection with the solenoid valve coil,
- assembly bag (M5 screws, barrels, barrel clamps).
The set does not include:
- multivalve cover (housing),
- gas filler.
EKX450RSBF/BWE